hey guys, im looking for wheel adapters. i think i may have found the right ones. the rims came off a 90 mustang and they are going on my supra.

http://www.ezaccessory.com/.sc/ms/bdd/1119074437328849/9/nc/ee/184/Wheel%20Adapter%204%20Lug%204%2E5%26quot%3B%20To%2 04%20Lug%204%2E25%26quot%3B

according to the reference chart on the sidebar of the webpage, the mustang has a bolt pattern of 4 x 108 and our supras are 4 x 114.3. ive got the correct adapters right? hows the offset going to be? thanks

1990 mustang should be a 5 bolt I think. Those spacers are 1" thick or 25mm so It depends on your wheel width what the optimal offset is. The stock wheels are 7 inches wide with a +8mm offset. So using that spacer with a 7" wide wheel you would want about a 33mm offset wheel.

90 was strill fox body and 4 lug except the cobra was 5 lug

wheel adaptors..... "wheels and tires".......

moving.

wheel adaptors..... "wheels and tires".......

moving.

yea i realized that after i posted.

anyway, the rims are 15 x 8's. hows that for the offset?

oh god....

wheels would need to be +25-+30mm. id get 4x114.3 to 4x100 which is way more common in that offset then the 108.

Wasn't there rumor that you could swap rotors and hubs from a Starion/Conquest? Seems like that would be the ticket since it would be a 5 lug conversion and open up options for wheels?

fronts seem to work if the right seal can bve found, but rears havent been confirmed. i havent seen any starions in the boneyard in awhile. as soon as i do im grabbing the rear hubs for rsdeo to try out.